Wallbox Pulsar Plus - Charging station with Fixed Charging Cable - 1 & 3-phase up to 22 kW

Small but powerful Charging station

The Pulsar Plus is a small but powerful Charging station. Does it Charging station nevertheless received an IK08 certification. The IK value shows that the Charging station is resistant to shock and impact up to a force of 5 joules. In plain language, this means that the Pulsar Plus does withstand a bump and thus last for years!

Fixed type 2 Charging cable at the Wallbox Pulsar Plus

The Wallbox Pulsar Plus is a Charging station including type 2 Charging cable. Perfect for if you have a type 2 electric car and want to save time when charging at home. This is because with a fixed cable, you no longer have to use your own Charging cable out of the trunk and put it away again after charging. Instead, you can plug the cable into your car right after charging and you're charging right away. The same goes for unplugging. You take out the plug and hang it on a cable holder, after which you can immediately use the car.

Up to 22 kW and for both 1-phase and 3-phase connections

Despite its small size, the Wallbox Pulsar Plus can charge up to 22 kW and be connected to both 1 phase and 3 phase. However, to use 3 phase 22kW (3x32 amps), you must meet these two conditions.

1. The meter box must be reinforced by your grid operator to support 22 kW.

2. The EV's onboard charger must be able to receive 22 kW of charging power.

Wallbox Load Balancing

The Pulsar Plus charging station is compatible with Load Balancing, also called by Wallbox "Power Boost. With Load Balancing, the current energy consumption is measured and the Wallbox Pulsar Plus only receives the residual power capacity from your network. Because the charging station only receives and uses the residual capacity, your power grid is never overloaded.

P1 meter or power meter?

For Dynamic Load Balancing you need a P1 or power meter. Load Balancing via P1 meter requires that you have a smart meter in your home. Via the P1 meter you connect the wallbox and the smart meter, which measures the energy consumption in your household. For the connection, you need a free P1 port in the smart meter, into which the data cable goes. The biggest advantage is that the P1 meter is easier to install than the power meter. 

The power meter does the same thing, only this meter is a little trickier to install than a P1 meter. This is because the power meter is installed between the meter box and groups. If you use the Wallbox load installed by a certified electrician, he will take this task off your hands.

Dynamic Power Sharing

With Dynamic Power Sharing, the Wallbox Pulsar Plus distributes the available power between multiple charging stations. Thanks to this feature, multiple connected vehicles are optimally charged.

Schedule charging sessions

With the Wallbox Pulsar Plus you can schedule when you want your car to charge. By scheduling charging sessions, charging based on your daily schedule becomes easier and you benefit from lower electricity rates during off-peak hours.

Eco Smart

The Eco Smart feature allows the Pulsar Plus to charge your electric vehicle via solar energy. To use the Eco Smart feature, the solar panels must generate at least 6 amps (1.4 kW) of excess power per phase connection. On average, you need 12 solar panels for this.

The myWallbox app

Via wifi, 4G Bluetooth or LAN, you are always connected to your Wallbox charging station. For example, via the myWallbox mobile app, you have instant access to all charging data and can change charging settings.