Wallbox Pulsar Max - Type 2 Charging station with Fixed Charging cable - 3-phase up to 22 kW

Big brother of Pulsar Plus

The Wallbox Pulsar Max is the improved version of the Wallbox Pulsar Plus. The Pulsar Max has an improved processor, making charging even more efficient. This Wallbox can also be connected via data cable and has an improved security protocol. This is especially nice for business use, when you have multiple charging stations used by multiple chargers. In addition, the Pulsar Max has also been reinforced and received a higher IK value for this purpose, namely IK10 instead of the IK08 that the Pulsar Plus has.

Fixed type 2 charging cable with the Wallbox Pulsar Max

The Wallbox Pulsar Max is a charging station including type 2 charging cable. Perfect if you have a type 2 electric car and want to save time when charging at home. This is because with a fixed cable, you no longer have to take your own charging cable out of the trunk and put it away again after charging. Instead, you can plug the cable into your car right after charging and you're charging right away. The same goes for unplugging. You remove the plug and hang it on a cable holder, after which you can immediately use the car.

Both 1-phase and 3-phase and up to 22 kW charging!

Despite its small size, Wallbox Pulsar Max can charge up to 22 kW and can be connected to both 1-phase and 3-phase systems. To use 3 phase 22kW (3x32 amps), you do need to meet these two conditions.

1. The meter box must be reinforced by your grid operator to support 22 kW.

2. The EV's onboard charger must be able to receive 22 kW of charging power.

Dynamic Load Balancing

Dynamic Load Balancing is also called Power Boost by Wallbox. With Dynamic Load Balancing, the current energy consumption is measured and the Wallbox Pulsar Max only receives the residual power capacity from your network. Because the charging station only uses the residual capacity, your energy connection is never overloaded.

P1 meter or power meter?

For Dynamic Load Balancing you need a P1 or power meter. Load Balancing via P1 meter requires that you have a smart meter in your home. This is because through the P1 meter you connect the Wallbox and the smart meter, which measures the energy consumption in your household. You need a free P1 port in the smart meter for the connection, into which the data cable goes. The biggest advantage is that the P1 meter is easier to install than the power meter.

The power meter does the same thing, only this meter is a little trickier to install than a P1 meter. This is because the power meter is installed between the meter box and groups. If you have the Wallbox charging installed by a certified electrician, he will take this task off your hands.

Smart charging with Tibber Pulse

The Tibber Pulse is a real-time power meter that can be easily connected to your existing smart meter. By continuously monitoring your power usage and adjusting the charging rate, the Pulse prevents overloading your main fuse. It is important to emphasize that you do not need a subscription or to be a member of the energy provider Tibber to use the Pulse.

Dynamic Power Sharing

With Dynamic Power Sharing, the Wallbox Pulsar Max distributes the available power between multiple Charging stations. Thanks to this feature, multiple connected vehicles are optimally charged.

Schedule charging sessions

The Wallbox Pulsar Max lets you schedule when you want your car to be charged. By scheduling charging sessions, charging based on your daily schedule becomes easier and you benefit from lower electricity rates during off-peak hours.

Eco Smart

The Eco Smart feature allows the Pulsar Max to charge your electric vehicle via solar energy. To use the Eco Smart feature, the solar panels must generate at least 6 amps (1.4 kW) of excess power per phase connection. On average, you need 12 solar panels for this. With Eco-smart, you can also choose to charge on a combination of your power connection and solar power. That way, with a Wallbox charging station, you're always driving greener!

The myWallbox app

Via wifi, Bluetooth you are always connected to your Wallbox charging station. Thus, via the mobile myWallbox app, you have direct insight into all charging data and can change charging settings.